Shipwire is a full-service, technology-driven 3PL provider.
Pipe17 supports the following connection flows for the Shipwire Fulfillment connector:
- Push product catalog
- Push shipping requests
- Pull inventory
- Pull fulfillments
- Push arrival (inbounds)
- Pull receipts
- Pull locations (enabled by default)
- Push Returns (RMAs)
- Pull Returns (RMAs)
In this Article
Requirements
- Pipe17 Account - Ensure that you have a Pipe17 account. If you do not yet have a Pipe17 account, book a demo with a Pipe17 team member to get started.
- Ensure you have access to your Shipwire admin account. This will be needed to establish connection to Pipe17/Shipwire account.
Connecting Shipwire Fulfillment to Pipe17
- In Pipe17, click the Integrations tab on the left
- Click Add Integration in the upper right corner
- Search for Shipwire > Add
- When the Flow Settings menu appears, click Next. We will leave these turned off for now
- Select Environment: Sandbox or Production.
- Username: Enter your Shipwire portal username.
- Password: Enter your Shipwire portal password.
- Click Connect.
Connection Flows
Pipe17 supports the following order flows for the Shipwire connector. Let's go over them all in higher detail!
- Products
- Push product catalog information to Shipwire: Turning on this flow will enable Pipe17 to push your product catalog (originating from a sales channel or another connector) to Shipwire.
- Shipping Requests
- Push shipping requests to Shipwire: Turning on this flow will enable Pipe17 to send a shipping request to Shipwire for your orders as they are pulled in by Pipe17.
- Inventory
- Pull inventory information from Shipwire: Turning on this flow will enable Pipe17 to pull inventory per product, which can then be pushed to your other integrations.
- Fulfillments
- Pull fulfillments from Shipwire: Turning on this flow will enable Pipe17 to pull fulfillment/tracking data for each order once it is available. At this point, Pipe17 will push that data back to your sales channel where applicable.
- Arrivals
- Push arrivals (inbounds) to Shipwire: Turning on this flow will enable Pipe17 to push a completed arrival to Shipwire for processing.
- Receipts
- Pull receipts from Shipwire: Turning on this flow will enable PIpe17 to pull receipts from Shipwire, which can then be pushed to another connected integration (ERP for example)
- Locations
- Pull locations from Shipwire: This flow is turned on by default.
- Returns
- Push & Pull Returns to/from Shipwire: Turning on this flow will enable Pipe17 to pull Returns (RMAs) from Shipwire and also push Returns (RMA) updates to Shipwire.
What's Next?
Congrats! You've connected Shipwire to your Pipe17 account, and you're now ready to begin testing! Check out our Pipe17 Quick Start Guide for some helpful context on testing and other subjects.
Need help with order flows or integration specific settings? Contact our support team. We're happy to help! |
Comments
0 comments