- Release Notes 2024-07 (July Release)
- Release Notes 2024-06 (June Release)
- Release Notes 2024-05 (May Release)
- Release Notes 2024-04 (April Release)
- Release Notes 2024-03-21
- Release Notes 2024-03-07
- Release Notes 2024-02-15
- Release Notes 2024-02-07
- Release Notes 2024-01-25
- Release Notes 2024-01-10
- 2023 Release Notes
Release Notes 2024-07 (July Release)
- NEW: Salesforce Service Cloud Connector
- NEW: Deprecated /shipment API, and replaced with /shippingRequests API
- Automation engine option to allow triggering automation rules on bulk sync action for orders and shipping request
- Inventory pull to support canonical or vendor or both SKUs
- Support adjusting virtual inventory for following scenarios
- Order is cancelled or archived
- Shipping Request is cancelled
- Order line items are marked requiresShipping = false
- New line items added to the order
- SKU on the line item changed
- Inventory commit for bundles
- New right side cards to display exceptions, custom fields, address, etc. on shipping request details page
- Allow setting a flag on the order to skip sending tracking information for lines added to the order through automation engine rule
- Allow marking Order status as Ready for Fulfillment, Review Required from details page
- When cancelling shipping request, allow user to change order status to Ready for Fulfillment, Review Required, Canceled, or leave it as-is
- Show "effectively" paused locations on order routing rule cards
- Add shipment address display to shipment card to support orders with multiple shipping address
- Improve Est. Next Run information to accommodate current in-progress run, or previous failure runs
- Improved explanation for the red and green fields when viewing changes on the User Config Events
- Allow exporting exception details
- Improve performance of drag/drop of order routing rules
- FTP: Add file name & content on the outbound event
- Cin7 Omni: Push & Pull Order Credit memos
- Bergen: Push Wholesale Orders
- ITS: Support selection of unit of measure for which inventory to be pulled, others ignored
- NetSuite: Hide (deprecate) 'Multiple Customer Match Logic' setting as its not used any more
- Ware2Go: Support the new bundled and unbundled billing plan
- NetSuite: Improve look and feel of NetSuite filters
- Square: Fix for to avoid updating the variant item data for Square when variant exist
- Fix for to avoid clearing document stream field in the connection tab for EDI connector on refresh
- Fix for incorrect update of package weight, dimension and unit of measure in TTS
- Fix for over receiving quantity on Receipt for TO, and possible duplicate receipts created
- Fix to consistently pull latest doc in mapping test page
- Fix to consistently retain the linteItems's uniqueId value when creating Arrivals in the UI from the original PO/TO line
- Fix to not allow user to provide a negative number on 'Hold minutes' field
- Fix to account for whitespace when adding reason for change notes
- Fix to avoid user needing to double click on Profile to see the company logo
- Fix to ensure mapping changes done by Pippen AI marks the page dirty and reminds user to save changes
- Fix to allow user consistently create location manually or provide graceful error when creation fails
- Priority: Fix to correctly use KLINE when pushing fulfillments
Release Notes 2024-06 (June Release)
- NEW: Support for "do not track inventory" at the Location level, Product level and inventory level (i.e. SKU+Location)
- NEW: Support for bulk export of shipping request
- NEW: Allow JSON edit for all users, will change notes
- NEW: Shipping contact address object to support orders with multiple shipping addresses
- Ignore inactive Location in order routing engine rule evaluation
- Allow "soft" deleting orders from order details page
- Show important delivery dates, such as Expected Delivery Date, Ship by Date, etc., on the order details page
- Allow editing extShipmentId when creating new shipping request
- Recalculate bundle inventory when bundle composition definition changed on product page
- Integration mapping lookup table to show an example of the format expected, and to be highlighted when custom data provided
- Highlight inactive locations on routing rule, since they are ignored during rule evaluation
- Allow Test Mapping even if integration is in error or disabled
- Consolidated menu options on the order details page with quick access to most common action
- Show change note dialog to all, but keep it optional if admin has left reason for change optional
- Show list of orgs to select if user trying login into deleted org
- Show activity links in TO & PO details page for all related entities
- Ability to recreate/re-pull shipping request for a TO (to be able to re-send Arrivals)
- New query parameter in Event Log to search by external IDs
- Support for holding shipping request via an action in automation engine rule
- Enable copy & paste in multi value filters on Event Log page
- Add select all / none to Event Log quick filters and better arrangement of filters on the page
- Improved compare, view json and table column organization for User Change Activity list page
- Split payments on order object to separate shipping fee from the other payments
- TikTok: Support TikTok's new virtual bundle functionality
- TikTok: Update carrier matching & support carrier fallback
- TikTok: Support capturing the acknowledgement of tracking push to TTS in fulfillment.acknowledgedBy
- Amazon MCF: Allow inventory filter by regular expression
- NetSuite: Support inventoryDetail and unitCost for the new NetSuite E-comm connector
- NetSuite: Default to visual editor mode for settings page
- Acumatica: Improved readme to provide information on how to get and use non-expiring tokens
- Brandboom: Improved help text to clarify only order status is pushed and not tracking on fulfillment out
- UNIS: Auto combine duplicate SKU line items in arrivals
- SellerActive: Additional flows to push order, product, and pull inventory and fulfillments
- Fix to not show dismissed/irrelevant exceptions assigned to orders on dashboard, and order details page
- Fix to bring feature parity between Transfer Order shipping request and sales order shipping request
- Fix to Pippen AI auto generation of order routing rule incorrectly checking 'Do not check inventory'
- Fix to improve the warning text when cancelling the shipment from order details page
- Fix to avoid false indicator of unsaved changes on automation rule editor
Fix to show proper amount of availableToPromise that includes 'Avail + Inbound' on inventory list page - Fix to call Purchase Order's status as closed instead of canceled when user closes the PO
Fix to ensure clearing filter option is available on the advanced filter - Fix to ensure correct days visible on "Entity ID" , "Entity Type" and "Related Entity ID" in the User Change Activity page
- Fix to show proper hyperlink to target location on User Change Activity page
- Fix to improve help text for Shopify setting to Enable periodic inventory reconciliation
Release Notes 2024-05 (May Release)
- NEW: SellerActive Connector
- NEW: Orderful UCC Label Connector
- Hide / obfuscate sensitive field values in Event Log
- Show status of acknowledgment from selling channel for fulfillments on order details page
- Capture user updates to Inventory
- Use the current user's API key instead of org level bulk action service API key to enforce permissions
- Do not activate status of soft deleted products (with same sku) from a bulk product import job
- Advanced Form to fill additional Receipt details
- Show all shipping request errors and allow dismissing them on the details page
- Show current user permission in user profile page
- Capture user change activity for inventory changes
- Improved search and filter for Statement Report (aka Settlement Report)
- Show publish status on product details page
- Ability to create new product using JSON from the UI
- Ability to expand and collapse order routing rule cards
- Simplified line item editing on order details page
- Show expected delivery date on order list page
- Improved details page for Transfer and Purchase order when in Draft status
- New Date & Time Range picker component for filters
- Show routing status on order details page
- Bulk export of Fulfillments
- Event Log filter for Statement (aka Settlement) events
- Exception list page filter for Statement (aka Settlement)
- Controlled editing of Amazon orders per Amazon policy
- TikTok: Avoid updating variants on TTS, if removed from Pipe17
- NetSuite: New filters to skip flowing invoices for orders come from specified sources
- NetSuite: Support creating parent along with child products in Pipe17
- Amazon: Update AWD connector to use the new APIs
- Amazon Seller Central: Support for Multi Location API
- Acumatica: Map product from Acumatica warehouse to specific Square location
- Cin7 Omni: Support Return flow
- Brightpearl: Support order and fulfillment push
Release Notes 2024-04 (April Release)
- NEW: Pippen AI support Shipping Request automation rule generation using AI
- NEW: Import/Export Order Routing Engine rules
- NEW: Shopify Settlement Reports
- NEW: Support for the new Flexport (was Deliverr) Inbound APIs
- NEW: Test preview order routing for development and troubleshooting
- NEW: Side bar menu options to account for user permissions when displaying links
- NEW: Purchase order export with line item details
- NEW: Added configurable import/export for integration & engine settings and mappings
- NEW: Ability to quick rerun bulk job from jobs list page
- Show line item that caused potential overfulfillment on Order details page
- Filtering by type and status on integration list page
- Better handling of large number of images on product catalog
- Show current user role on the about box
- Show warning banner if shipping method mapping feature is disabled in the org
- More data visible on Fulfillment table page, with better filters
- New view JSON option to shipping method mapping page
- Additional columns to Event Log: Retries, User ID, Batch, Timestamp
- Improvements on User Activities around how data is captured and displayed
- Ability to filter events by event ids
- Event Log will now automatically search
- Reapply committed qty to available on cancelRestock of shipping request
- Legacy events search URLs now redirected to the new Event Log
- Show retry count for outbound events in the event details page
- Better product import template descriptions
- Shopify: Support to pull Metafields from Shopify for Orders and Products
- Ware2Go: Pull fulfillments not submitted via Pipe17 (manually created in Ware2Go or created via API),
- collapse fulfillment with same tracking ID, and categories address errors as validation failures
- Flexport: Pull cancelled shipping requests from Flexport (was Deliverr)
- TikTok: Pull oh-hold orders in TikTok
- TikTok: Support to push IM response based on order placement
- Whiplash: Support Bulk API for large orders
- NetSuite: Baseline mapping to remove line items not needed when creating Item Receipt, support sending fulfillments back to NetSuite with shipment locations, skip JSON validation for non-empty integration setting JSON fields, fix to consistently show orders shipped in NetSuite as such in Pipe17 and TikTok, fix for Fulfillment Item lines to fully reflect in NetSuite
- Cin7: Support cartonization, push payment info when pushing orders based on shipping request status
- TikTok: Support for multiple fulfillments with same tracking number
- ShipBob: Support for letting ShipBob managed routing of the order
- Barrett: Support Returns - Advanced options
- ShipStation: Support for multiple tracking numbers per shipping request from ShipStation flowing into TikTok
- BoxC: Baseline mapping to add unique ID to order ID when pushing shipping request to BoxC
- OSA: Baseline mapping to allow setting validateAddress as false
- 3PL Central/Extensiv: Baseline mapping to remove additional string after ":" from purchase order number
- Ware2Go: Better handling of freight orders
- Fix login for users who are not part of their JWT primary organization
- Fix for testing custom mapping with overrides would lead to unexpected test results
- Fix for with users with appropriate permissions not being able to view and edit product channel options
- Fix for dates on transfer orders table page showing "invalid date"
- Fix for Shipment Request page freeze the first time it was accessed
- Fix issue with not being able to view inventory for complex SKUs
- Fix for companies with 1000+ fulfillment methods not able to see all on the Shipping Mappings page
Release Notes 2024-03-21
- NEW: Mirakl Marketplace (MP) Connector
- NEW: Petstock EDI Connector
- NEW: Amazon Seller Central: Support to pull Settlement reports from Amazon
- Allow global "User" role to dismiss or resolve Exceptions
- Event Log: Keyword based search for event data
- Copy order-level shipping method attributes to custom fields on shipping request
- Set cost to 0 for new line items added in Pipe17, keep orignal price for SKU changes to line items
- Show last updated information as date-time to include the hour and minute of the last push/pull and next run
- For Orders, Shipping Request, Fulfillment, Product and Inventory, bulk on-demand force sync on list page, and individual on-demand force sync on details page
- Update product channel options UI to link the integration name to the respective integration details page
- Removed link to the details page for deleted locations
- Render list items in the integration readmes with bullet points or numbers
- Fix for missing product cost on inventory export
- UI improvements to the in-app support documentation panel
- Fix for custom error message for duplicate mapped SKUs
- Hide shipping request lifecycle dates in the shipping request details card, if those values are null
- Reset pagination when changing page size for the integrations list page
- Amazon Seller Central: Improved inventory filter by SKU on a way out to Amazon SC, Unified SKU filter syntax to match current help texts, Filter FBA items from outbound inventory feed to Amazon
- Shopify: Support to mark order as SentToFulfillment as soon as successfully created in Shopify
- NetSuite: Set customer refund amounts as negative on settlement deposits
- TikTok: Fix for syncing products to TikTok Shop with multi dimension variant options, Support to pass certificate to TikTok using custom field with same as certificate name
- Acumatica: Set correct Warehouse ID as it pertains to location mapping on orders to Acumatica
- Extensiv/3PL Central: Auto-populate fulfillment methods
- WooCommerce: Support to pull refunds
- BigCommerce: Support to pull discounts and refunds
- Wayfair: Support for pushing inventory totals into select Wayfair location
- Mirakl Marketplace: Fix to mark order as accepted in Mirakl MP
- Barrett: Support for pushing products & PO/TO inbounds & receipts
- SalesForce Commerce Cloud: Filter products to pull by custom field
Release Notes 2024-03-07
- NEW (Beta): Event Log table page with better performance and improved UX
- Product import to apply new values to the active product and not to the deleted product
- Performance improvements for inventory reports
- Internal state to avoid order routing for orders forced into canceled, fulfilled, archived status outside of normal flow
- Ability to add new line items to orders in Pipe17 for fulfillment, and block sending tracking for extraneous line items to selling channel
- Events to capture user identity for easy search on events triggered by manual action
- Default date range on `All Events` table to `Last 3 Days` to improve fidelity of search
- Improved helper texts for integration mapping fields
- Bulk rerun of events removed in lieu allowing rerun a single outbound event for predictable results
- Changed API key page to not allow users to grant permissions that they do not have
- Changed order line item search to display when there are more than 5 items
- Allow users creating shipments on an order to select "ready for fulfillment" or "review required" as the new shipment's status
- Added 'failed' as a valid filter for job status in the jobs table page
- Pagination on integration list page is hidden if there is only one page of integrations
- Improved in-app help for Amazon MCF, Walmart Marketplace, Barrett, ShipBob, Brandboom, DaVinci, Etsy, Faire connectors
- Shopify: Relax SKU matching algorithm for inventory push to accommodate for case mismatch in SKU names
- Amazon Seller Central: On-demand action to pull orders by specified IDs
- NetSuite: Settlement report performance improvement to avoid time outs, support for refunds adjustments for non-SKU line items, support pushing receipts back to NetSuite as Item Receipts once the return is received in Pipe17
- TikTok: Added subsidy fees to refunds, adjusted platform discounts on refunds, and partial as well as multiple refunds flow support
- Acumatica: Matrix product creation with reference handle, pull shipments with specific status, API call performance improvements
- Square & Acumatica: Flow refunds from Square to Acumatica
- Logiwa: Resolve pack type for inbound and outbound orders
- Ware2Go: Pass Amazon date fields to orders created on Ware2Go, support for partially shipped Order status
- ITS: Fix baseline mapping to copy shipping cost on fulfillment pull, baseline mapping to send shipByDate to orders created in ITS, fix to send carrierName & carrierService
- Email: Fixed issue with not being able to record fulfillments
Release Notes 2024-02-15
- New feature to allow capturing user changes and comments for order routing engine, locations, entity mapping, shipping methods, org profile, filters, and API keys
- New feature to obfuscate PII data when pushing data to Snowflake & Amazon S3
Pagination support on the integration list page - Automation Engine: Additional help to indicate valid return data required in update code action
- Additional warning when cancelling Shipping Request suggesting what to expect downstream on the fulfillment channel
- Inventory export now can include product name, and cost
- Order details card for routing now hides by default runs that did nothing, but allows user to see all runs
- New warning indicating the side effects of enabling order routing engine after orders are already flowing through the system
- Chord Connector: Location picker shows valid Chord locations in top of the list
- Fix to avoid adding uplicate shipping order methods
- Fix for Product upload (channel options) silently failing on misspelled column names
- Fix for Product import to include more comprehensive errors reported in the result file for failures
- Fix to avoid shipping confirmation emails being sent from Shopify when "notify customer" is set to false
- Fix to Event list page filtering failing on large record counts
- Fix to allow editing Purchase Order without requiring to provide line item cost
- Ebay Connector: Fix for inventory updates failing for certain products
- Acumatica Connector: New feature to support pulling (Non-Stock) bundles from Acumatica and categorized as such in Pipe17
Release Notes 2024-02-07
- Over-fulfillment Analyzer: New feature added to analyze every shipping request for potential over-fulfillment and process depending on policy set by the user
- New feature to allow capturing user updates to Products
- New feature to allow capturing user updates to Automation Engine rules
- New feature to allow user to opt in to cancel open shipping requests when cancelling an order
- New feature in Shipping Request list to show additional display columns, filters and include various IDs for quick search
- New readme on entity mapping to include how-to restore / revert mappings
- Custom entity mapping to allow user to select expected data type for "Missing" & "Default" value fields
- Event data to show "Automation Engine" in Request Context instead of a random API key
- Fix to hide search bar in order details page for short item list
- Fix to simplify the user experience of the date picker
- Fix to properly format integration readme on the integration details page
- Fix to consistently filter shipping request by location ID
- Fix to split shipment logic to ensure consistent check of unexpected splitting of orders
- Ware2Go Connector: Use the SKU on shipping request instead of the package to avoid upper casing issue
- CommerceHub DSCO: New feature to properly support ingesting Dropship orders
- TikTok Connector: Fix to product category_id update to TTS
- EDI: New properties to fulfillment and shipment_box business object to support B2B orders
- ShipStation Connector: New feature to support pulling orders with certain tag in ShipStation
- BrightPearl Connector: Fix for consistent order ingestion from BrightPearl
- TikTok Connector: New Feature to selective send fulfillment details for valid line items and ignore invalid line items
- Whiplash Connector: New feature added to ignore inventory adjustments to certain locations to avoid double counting
Release Notes 2024-01-25
- New feature to add user-comments for an integration
- New feature to allow rerun of outbound events for all Connectors from event list page
- New ability to search line items on the order details page on the order, shipping request and fulfillment
- Automation Engine: New custom code action for order rules
- Automation Engine: New order trigger supports setting order in "Draft" status
- Exception list page has new columns to display, updated default visible columns and query search that includes related entities
- Exceptions for Returns are now visible on the dashboard, list page and details page
- Three different ways to view entity mapping for integrations - All, Baseline Only, Custom Only
- Proper visualization of the branding logo for secondary orgs for a multi-org account
- Rename "Configuration" left nav menu to “Settings"
- Dashboard stats "Order Received" to include all orders ingested including archived orders
- Manual creation of Shipping Request defaults creation with over-fulfill policy as "approved"
- Show "Customized" label next to mappings tab on integration page when the integration has at least one custom mapping
- Integrate Zendesk Help Center articles with integration details page for advanced readme
- Fix to show user ID on user table page
- Fix for issue rendering an empty form when integration settings saved
- Fix to inventory filter to rename "product" to "sku" and support standard text search operators
- Fix on the Returns UI showing Order as "Multiple" when return created for just one order
- Fix to advanced filter on location list page when selecting 'source integration' 'equals' and writing some of the integrations names
- Fix to not copy external reference ID when cancelling and recreating a new shipping request
- Fix to add (invite) user page to avoid error messages related to address
- Bulk action to show a warning with more than 10k rows selected for the action
- Improve inventory import bulk action, allows importing exported CSV data
- Fix to ensure bulk dismiss of exceptions working properly
- Fix to bulk job to provide proper error instead of an empty result file
- Fix to bulk order export to handle orders greater than 10K
- Transfer Order bulk export now includes expectedArrivalDate, additional columns added for display on list page
- Analytics connector: Limit force resync period to last one month to avoid starving new data push
- TikTok Connector: New feature to support Pre-Owned Category in Products
- Mochila Connector: UCC Label Support
- Salesforce B2C Cloud Connector: Fix for consistently marking order status to 'new' when new order ingested
- Chord Connector: Fix to avoid creating shipping request for POS orders
- TikTok Connector: Fix for fulfillment push for UK market - support marking Package As Shipped
- NetSuite Connector: Fix to use the parameter withTotalsFees to properly get transactionFeesTotals in order to set up Deposit in NetSuite
- Acumatica Connector: Fix to compose all taxes as a single value to Acumatica
Release Notes 2024-01-10
- New Capacity Logistics Connector: Support for Fulfillments, Inventory, Shipping Request, Arrivals, Receipts, and Location [Beta]
- New ITS Logistics Connector: Support for Inventory, Fulfillments, Shipping Request, and Locations [Beta]
- Update logourl for multiple connectors
- Intelligent potential over-fulfill analyzer for every new shipping request created in Pipe17
- Mark Shipping Request with .# in extShipmentId as Review Required when option enabled by user to avoid over fulfillment
- For Entity Mapping Testing, automatically pull the latest entity document from the org when input is empty
- Multiple user interface improvements for custom entity mapping
- Setting proper default columns for inventory list page
- Fix to not required address and external location when creating Location
- New Automation Engine Action to allow raising exceptions on orders
- Hide pagination footer in Order detail page when page count = 1
- Reuse External Shipment IDs when possible to leverage de-dupe logic in fulfillment channels
- Major improvements to Transfer Order details page - Event message in proper format, exception
message on respective entity, editing custom fields, etc. - On Shipping Request view json page, show Vendor Doc from FAILED event data
- Improvements to updating inventory of all bundle master when virtual inventory of one bundle master updated
- Support for new entity types in API Key create/update UI
- In Event list view, instead of api key id show key name for automation engine related events for easy differentiation
- Type ahead search for Fulfillment Method drop down in Shipping Method Mapping
- Upgraded Settlement Report Support in the core platform
- Skip raising exception when push fulfillment already reported
- Fix order detail page to not loose line customFileds when editing order line items
- All Connectors: Support for new entity "Statements" support on integration settings tab
- Shopify Connector: Skip pulling empty product updates from Shopify into Pipe17
- Shopify Connector: New inventory reconciliation setting, to attempt to reconcile inventory changes periodically for data to eventually align between 3PL and Shopify, useful for products with low inventory levels.
- Shopify Connector: Collect all child images and include them to parent on Shopify side for proper display
- TikTok Connector: Add support to push products to TTS in draft status
- TikTok Connector: Allow to choose default refund reason in settings
- TikTok Connector: Upload Child product images to TTS
- TikTok Connector: Inventory update pushed even if TTS returns product limit exceeded
- TikTok Connector: Option to push brand update to TTS
- NetSuite Connector: Product Mapping For NetSuite
- NetSuite Connector: Incorporate Cash Refunds and Customer Refunds in NetSuite Deposit
- NetSuite Connector: Skip pushing fulfillments again if the fulfillment is already pushed to NS
- NetSuite Connector: Support mapping from a standard field from NetSuite product object to Pipe17 as a published channel sku
- NetSuite Connector: Add an identifier to avoid NetSuite E-commerce pushing fulfillments that come from NetSuite back to NetSuite
- NetSuite Connector: Add identifier to avoid pulling fulfillments from NetSuite when they are created by NetSuite E-commerce integration
- NetSuite Connector: Fix to submit complete fulfillment information for orders
- Acumatica Connector: Push Branch ID to branch field for line item and in financials tab
- Acumatica Connector: Update time based on order details level for time of routing
- Acumcatica Connector: Pull products based on specific Warehouse ID
- Acumatica Connector: Fix to specific the timezone to use when pushing date/time to Acumatica
- Ware2Go Connector: Update baseline mappings to support passing Amazon Seller Fulfilled Prime related data
- Amazon S3 Connector: User control to push files for all files for the day under a date folder
- Amazon S3 Connector: User control option to push files with additional path to Amazon S3
- Amazon SC Connector: Collect additional charges for Amazon SC orders
- WooCommerce Connector: Improvements on pushing tracking data to WooCommerce
- SFCC Connector: Pull discount pricing from SFCC
- SFCC Connector: Fix for proper product prices updates sync to Pipe17
- Deposco 3PL Connector: Handle shipment/fulfillment with possible SKU mismatches
- Whiplash Connector: Switch to using webhooks with REST "sweeper" for Orders and Inventory
- Mochila Connector: Add support to pull case pack inventory
- Shipstation Connector: Improve re-scan process performance, order not processed during fast polling will be pulled during next 6 hours with max delay of 12 hours.
Etsy Connector: New setting to control behavior on transition for matrix product from 0 inventory to non-0 - ApparelMagic Connector: Update new APIs
- ApparelMagic Connector: For orders not requiring shipment boxes, update pick ticket to reflect line quantities according to fulfillment information available to avoid fulfillment exceptions
- Cin7 Core/DEAR Connector: Delay processing fulfillment to avoid our of sync updates in DEAR
- Walmart Connector: Improved retrying of orders pull - retry each 3 hours for timeframe between last 12 to last 3 hours, result in at least 4 rescans for a specific period to avoid missing orders
- SPS FTP Connector: New option to send acknowledgement on order cancel
- Veracore Connector: Tracking repull on label void flow
- Square Connector: Pull ecom orders along with POS orders & pull fulfillments
Comments
0 comments